-
Featured User: kurt
Open-source hardware project hosting is my passion. I spend most of my free time building neat gadgets or planning what I'll build next. I love building things, and I want to make Open Hardware Hub a place that inspires others to build, ...
-
Updates 2013 February 18
It's been a while, hasn't it? Well, that's ok because we've got a lot of updates to talk about. Most of these have been effective on the site fora couple weeks now. A few may or may not be active when this article gets posted, but they'll certainly be applied in the ...
Knight Rider Lights
Files
Bill of Materials
This open source hardware project contains no parts.
Steps
. Insert diodes
Insert a pair of 1N4001 diodes as shown. These diodes connect to the third LED from the top.
. Insert diodes
Insert a pair of 1N4001 diodes as shown. These diodes connect to the fourth LED from the top.
. Insert diodes
Insert a pair of 1N4001 diodes as shown. These diodes connect to the fifth LED from the top.
. Connect 9V Battery
Connect a 9V battery as shown. The red wire is +9V, and the black wire is ground. Watch the LEDs light up in sequence and "bounce" back and forth.
Download steps w/o images
Download steps w/ images
Revisions
6 - updated description
5 - updated steps.
4 - changed LED part
3 - add project image descriptions
2 - added file descriptions
1 - Initial project release
Add revision
blog comments powered by Disqus
Back
